OVERVIEW & BENEFITS
The Seal 'N Lock Natural Luster (5 Gallon) is a professional-grade, semi-gloss paver sealer that enhances the natural color of pavers, concrete, and masonry while providing long-lasting protection. This environmentally safe, water-based sealer penetrates deeply to protect against UV damage, stains, and weathering while maintaining a natural sheen finish.
Formulated for both residential and commercial applications, the Natural Luster sealer delivers a durable protective barrier without the high shine of a wet-look sealer—perfect for those seeking a natural yet enhanced appearance.
Specifications & Details:
-
Product: Natural Luster Paver Sealer
-
Brand: Seal 'N Lock
-
Part Number: 01-NL5
-
Container Size: 5 Gallon Pail
-
Finish: Semi-Gloss / Natural Sheen
-
Enhances surface color while preserving natural look
-
Provides UV, stain, and weather protection
-
Breathable, eco-friendly, and VOC compliant formula
-
Safe for use on pavers, concrete, and masonry surfaces
-
Professional-grade protection for long-lasting results
This Seal 'N Lock Natural Luster Sealer offers the perfect balance between enhancement and natural appearance, making it a top choice for contractors and property owners alike.
Natural Luster® is available in 5-gallon Pails Only.
Natural Luster® Benefits:
- Superior Joint Stabilization
- Minimal toxic odor
- Inhibits Algae & Mold Growth
- Inhibits weed growth and ant mines
- Modest Enhancement
- Will not harm vegetation
- No need for polymeric sand
- UV Protection
- Provides a Protective Barrier
- Hot tire marking resistant
- VOC compliant in all 50 states
- One day process (No downtime)
- It May be applied to a damp surface
- User friendly and environmentally safe
Estimating Guide
Typically, the application rate will vary from 150 to 200 sq. ft. per gallon for this paver coating, although this rate will vary depending on the texture, absorption rate of the surface and the width of the paver joints.
Directions For Use
We recommend wearing protective goggles and latex gloves. For best results, apply Natural Luster® at temperatures between 60° F and 90° F. In cooler conditions, the sealer should be warmed to approximately 70° F. Do not apply if surface or ambient temperature s below 50°F. A test for compatibility, penetration and adhesion is recommended. If the temperature is going to drop below freezing (32° F) make sure the sealer has time to cure.
Mixing
Natural Luster® is designed to be diluted with 1 part water and 1 part sealer with a 2 coat system (flood coat and top coat). Natural Luster® requires mixing and stirring (2 minutes) prior to use.
Drying Time
Natural Luster® paver coating will normally dry in sunny areas within approximately 1 hour. Shaded areas, lower temperatures or high relative humidity will slow the drying process. The surface may be open to foot traffic in 24 hours and to vehicular traffic in 48 hours. To minimize tire marks, vehicles should not make sudden stops or tight turns.
Cleanup
- Immediately flush and agitate pump system after sealing with a mixture of 3 gallons water and 8 ounces of pine sol.
- Flush out the pump system with 5 gallons of fresh water.
- Pour two ounces of Pine Sol into one gallon of water, run through the pump system and leave in the pump until next application.
- Always run water through the pump prior to the next application.
Notes
Pavers with high absorption rate will require additional top coats of sealer to provide a protective barrier and desired enhancement.
Natural Luster® is not intended for submerged surfaces.
Maintenance
Periodic washing of pavers with a mild detergent to keep the area clean is recommended.
-
All chemicals and sealants are FINAL SALE and are not eligible for return, refund, or exchange. Due to the nature of these products, we cannot accept returns once the product has left our facility, regardless of whether the container has been opened or remains unused.
Please verify that you are purchasing the correct product and quantity before completing your order. All sales of chemicals and sealants are final.