PWP Sediment Filter - 10 Inch

PWP Sediment Filter - 10 Inch
OVERVIEW:
The Pure Water Power Sediment Filter - 10 Inch is a 2.5" x 10" replacement filter designed for use in your pure water system. With a 5-micron filtration capability, it effectively removes sediment and impurities from water. It is crucial to use this filter at water temperatures below 150°F / 65°C for optimal performance.

To maintain the efficiency of your water filtration system, it is advised to replace this sediment filter every 2 months or when its capacity is reached. Thanks to its low-pressure drop, this filter ensures minimal impact on water flow while offering a high capacity for soil and sediment removal. Regular replacement of the filter will ensure the continued effectiveness of the filtration system.

How to Install:
First, spin the filter housing (next to the water supply hose inlet fitting) completely off with a housing wrench. Next, remove the plastic wrapping off the filter and position the center hole on the shouldered ring on the bottom of the housing unit. Finally, screw the housing into the base and tighten it with a small filter housing wrench.

TECHNICAL SPECS:
Length: 9.875"
Width: 2.5"
Height: 2.5"
Weight: .28 lbs
Filter: 5 micron
Temperature: must be used under 150° F / 65° C
QUICK LOOK:
High quality
Long-lasting
Can be used in systems that require a 10" sediment filter
Replacement part
Easy to install
Removes impurities from water