Guide — How To Use Your Rig

Cleaning Concrete

  1. Turn on pressure washer
  2. Turn on FlowPro
  3. Set FlowPro to 'Mix'
  4. Set yellow Flush Valve to 'Downstream SH'
  5. Coat entire concrete surface with SH using the gun and the largest tip on your pressure washer wand (such as 6040)
  6. Allow SH to dwell on surface for around 10 minutes.
  7. Set FlowPro to 'Rinse'
  8. Connect Surface Cleaner to pressure hose.
  9. Clean the concrete using the surface cleaner.
  10. Connect the wand again, rinse entire surface.

Optional Post Treatment:

  1. Set FlowPro to 'Mix'
  2. Set yellow Flush Valve to 'Downstream SH'
  3. Coat the entire concrete surface with SH using the gun and the largest tip on your pressure washer wand (such as 6040).
  4. Set yellow Flush Valve to 'Rinse SH' and let run through the wand while rinsing surface.

End of Job Tasks:

  1. Set FlowPro to 'Mix'
  2. Set yellow Flush Valve to 'Rinse SH'
  3. Run pressure washer until you can no longer smell SH from the wand (around 5-10 minutes)
  4.  Idle pressure washer, then shut down.


Cleaning Fencing & Siding:


  1. Turn on pressure washer.
  2. Turn on FlowPro.
  3. Set FlowPro to 'Mix'.
  4. Set yellow Flush Valve to 'Downstream SH'.
  5. Coat entire surface with SH from the largest tip on your pressure washer gun.
  6. Allow mixture to dwell on surface for 5-10 minutes. 
    DO NOT ALLOW DRYING ON WINDOWS!
  7. Set the yellow Flush Valve to 'Rinse SH' and let run through the wand while rinsing your surface.
  8. Set FlowPro to 'Rinse'.
  9. Idle pressure washer, then shut down.

 

Softwash System:

  1. Pull hose all the way out.
  2. Turn on softwash pump.
  3. Set SH/Water/Soap to guide below.
  4. Turn yellow softwash (NOT DOWNSTREAM) Flush Valve to 'SH'.
  5. Pull trigger to begin spraying and give complete coverage to your work area.
  6. When complete, set yellow softwash Flush Valve to 'Water'.
  7. Pull trigger to rinse your entire work area.

 

(0 = Valve Completely Closed. 10 = Valve Completely Open)

Roof Mix:

SH = 5
Soap = 1
Water = 10

Heavy Stain Mix:

SH = 10
Soap = 4
Water = 10

House Mix:

SH = 3
Soap = 1
Water = 10