About the Unger nLITE SmartLock Replacement Clamp

Easily replace a missing or damaged SmartLock Clamp on one of your Gen 2 Unger nLITE Carbon Composite and 24K pole sections with these replacement clamps. The innermost section corresponds with the 22mm clamp size while the outermost section corresponds with the 37mm clamp size.

How to Replace:

1. Remove the clamp's lower screw
2. Pull the clamp up carefully
3. Replace the adhesive tape under the clamp if it shifts (replacement tape is included with your clamp)
4. Slide the clamp over the tape carefully and re-fasten the screw

*These clamps must always be fixed with adhesive tape for stability.

PRODUCT HIGHLIGHTS

• Replacement clamps
• Compatible with Gen 2 Unger nLITE Carbon Composite and 24K poles
• 6 sizes available
• Easy to install